Additional Information

Weight 1 lbs
Dimensions 2 × 2 × 11 in
Size

9 Fluid Ounce Cartridge

Unit

9 Fluid Ounce Cartridge

BestBond® Anchor

High Strength, Self-Leveling Liquid Epoxy for Structural Anchoring.

Uses: BestBond® Anchor is a high strength anchoring epoxy that permanently anchors posts, bolts and rebar to concrete, stone, masonry, and most rigid surfaces.  For use on horizontal substrates.

Features & Benefits: BestBond® Anchor features high tensile, compressive, and pull-out strengths. It hardens quickly and resists water, chemicals, and UV.  It is shrink-free and contains no water or solvents. For exterior or interior applications. 9 fluid ounce cartridge fits in hand-held caulking gun for easy installation.

Technical Characteristics:  Hardens in 40-60 minutes depending on temperature.  Pre-packaged cartridges fill 16 cubic inches.  Bulk packaging is also available and can be applied by trowel or squeegee.  Color: gray.

Meets ASTM C881, Types I, II, IV, V, Class B, C.

 

DescriptionUnitQtyPrice
9 Fluid Ounce Cartridge
$29.50

TYPICAL TEST RESULTS

Hardening Time minutes, appx. 40
Hardness Shore D 80
Pull-out Strength ASTM C-882 psi 1,600
Tensile Strength psi 3,700
Compressive Strength psi 11,000
Application Temperature oF 50-90

Customer Questions & Answers

    Wouldyou use Best Bond Anchor to "glue" a cinder block to finished concrete slab?
  1. Q Wouldyou use Best Bond Anchor to "glue" a cinder block to finished concrete slab? answer now
    Asked by John McDonough on July 10, 2022 10:15 am
    Answered by the admin

    Please call our technical department at 800-445-1754.

  2. Will this product, Best Bond Anchor, bond threaded fiberglass rods into a concrete slab?
  3. Q Will this product, Best Bond Anchor, bond threaded fiberglass rods into a concrete slab? answer now
    Asked by Jack on February 14, 2022 7:26 pm
    Answered by the admin

    Yes, that's exactly what that product is for.

  4. Can best bond be injected into structural cracks in glued laminated wood beams?
  5. Q Can best bond be injected into structural cracks in glued laminated wood beams? answer now
    Asked by Paul Ferrari on October 16, 2018 1:23 pm
    Answered by the admin

    You can use our LiquidWood and WoodEpox for your application. They are wood restoration products. The WoodEpox can be thinned with the LiquidWood.

  6. What tool do you use with this material
  7. Q What tool do you use with this material answer now
    Asked by Mark Schneider on September 21, 2018 6:18 am
    Answered by the admin

    It's packed in a caulking tube.

  8. Is the Best Bond Anchor a preferred product for high tensile strength caulking of cracks in concrete steps in Central Virginia climate?
  9. Q Is the Best Bond Anchor a preferred product for high tensile strength caulking of cracks in concr...... Read more answer now
    Asked by Don Dougald on July 28, 2018 5:12 pm
    Answered by the admin BestBond Anchor is a high-strength epoxy anchoring compound used to anchor posts, bolts and rebar to concrete, stone, masonry and most rigid surfaces. The BesBond Crack Repair is a high-strength epoxy crack-repair compound that permanently fills and repairs crack in concrete, stone, masonry and most rigid surfaces.

Send me a notification for each new answer.

Customer Reviews

There are no reviews yet.

Be the first to review “BestBond® Anchor”

Your email address will not be published. Required fields are marked *