Additional Information

Weight 13 lbs
Dimensions 9999 in

WoodEpox®

Easily and Permanently Replace Missing Wood

Uses: Use WoodEpox indoors and outdoors on window frames and sills, doors. columns, furniture, sculptures, and structural and decorative elements. all3columns

Features & Benefits: WoodEpox is a shrink-free epoxy compound that replaces, repairs, extends, and fills wood and most rigid materials. It permanently bonds to most surfaces. It is chemical, water, heat, and weather resistant, and dimensionally stable. WoodEpox has a no-slump consistency and can be used in any thickness or shape for structural and decorative restoration. WoodEpox works so well because like wood it can be: painted, stained, drilled, carved, sawed, nailed, planed, sanded, routed, and machined.

Technical Characteristics: Mix A and B together in equal volumes until a uniform color is achieved. Hardens within one to two hours.

Lightweight 3 .8lb/gal. approx. Pot Life: 20 minutes, so mix only what you can use within that time frame. WoodEpox is 100% epoxy solids and contains no VOCs or noxious odors. GREENGUARD Certified®

This product is GreenGuard® Certified, meaning that it has been found to contain virtually no VOC’s (volatile organic compounds).

Wood Restoration with LiquidWood and WoodEpox

Rated 5.00 out of 5 based on 3 customer ratings
(3 customer reviews)
DescriptionUnitQtyPrice
2 Pint
$39.95
2 Quart
$65.90
2 Gallon
$168.90
10 Gallon
$654.90

TYPICAL TEST RESULTS

Typical Test Results
Kg/cm2
Mpa
Psi
Compressive Strength 399 38 2,730
Elongation 3.2%
Hardness, Shore D 53-55
Tensile Strength 125.85 12.34 1,790

Customer Questions & Answers

  1. Q Next time you update your Historic Site List: The "Fox Coffin" House, Beltsville Maryland [Historic Site PG-61-7]
    Answered by the admin

    Thank you for the update!  Did you work on this project?  Do you have any photos you might be willing to share?  If so, please email info@abatron.com  Thanks!

  2. Q Can WoodEpox be used as a grain filler? Say for oak cabinet doors with a strong grain pattern?
    Answered by the admin

    Yes, that application should work well. You may want to mix in some of our pigments if you don't plan to paint/stain after application. 

  3. Q What is the recommended method for using WoodEpox in cool conditions such as for house exterior in fall/winter weather (say 25-40F air temps) - use an additive? or is external heating required. Will it cure eventually, just slower? E.g. can patience substitute for additives or heating?
    Answered by the admin

    WoodEpox® should be used at temperatures 60ºF or warmer.  We do have a cold weather hardener for WoodEpox if it is essential.  If the temperature is too cool when applied, WoodEpox may never harden properly.  For more on this subject, contact technical support at 800/445-1754.

  4. Q Will woodepox bond to punky wood that has had a wood hardener(minwax) applied to it? In filling a void, are multiple layers preferred to a single layer?
    Answered by the admin

    Yes, WoodEpox should bond to wood to which wood hardener has been applied.  Adding enough WoodEpox at one time to fill a void is preferable.

  5. Q In order to accelerate hardening of WoodEpox, what is the maximum temperature that should be used, such as with a heat gun? Your instructions indicate preferred temperature range of 60-90 degrees F but can temperatures higher than this be used? If so, what is the recommended maximum temperature. BTW, this is the best wood filler I have ever used!
    Answered by the admin

    We're so glad you enjoyed using our products! We don’t have a maximum recommended temperature established.  120 ® F heat will considerably speed up the hardening process.

Send me a notification for each new answer.

Customer Reviews

  1. Rated 5 out of 5

    Tim Weitzel

    Wood Epox is the only wood replacement system that provides strength, flexibility, durability and easy sanding/drilling.

  2. Rated 5 out of 5

    Tim T

    Love both the liquid and putty. This is a GREAT product and easy to work with. Once you learn how the materials behave, you can reconstruct complex profiles to repair damaged molding and other details; much cheaper than buying molder blades for small section repair!

  3. Rated 5 out of 5

    Brian M.

    The wood epoxy works great when used in conjunction with the Liquid Wood. I have used a competitors wood filler that I got at Home Depot and it did not even begin to compare with Abatron. The Wood Epoxy does everything the information sheet claims it will do. It is extremely hard once it reaches full hardness, it sands easily, it takes paint primer very well and it does not shrink or crack. The key is proper preparation of the material that is damaged and following the instructions. The product may seem a little expensive, but it goes a long way and is worth every penny.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…