Additional Information
Weight | 4 lbs |
---|---|
Dimensions | 11 × 6 × 6 in |
Structural 2-Part Wood Repair Epoxy Adhesive for Filling and Replacing Wood. Specially Formulated for Cold-Weather Use.
Uses: WoodEpox® – Cold is a variant of the original WoodEpox® wood replacement compound that is specially formulated for use in temperatures ranging from 35° F to 60° F.* This lightweight, epoxy adhesive putty is designed to repair, replace, extend or fill wood and most rigid surfaces. Use on windowsills, columns, decks, thresholds, doors, frames, shutters, columns, posts, balusters, floors, furniture, sculptures, artwork, and other wooden architectural elements. It can also be used to patch substrates other than wood including ceramics, stucco, and concrete.
Features & Benefits: WoodEpox – Cold is virtually shrink-free and bonds permanently to most surfaces. It is chemical, heat, insect and weather resistant. WoodEpox – Cold is lightweight, has a no-slump consistency, and can be applied almost anywhere including vertical and overhead applications. It is dimensionally stable and can be used in any thickness or shape. WoodEpox – Cold is easy to mix, apply, and finish. It can be painted, stained, drilled, carved, sawed, nailed, planed, sanded, and routed, just like wood. It is compatible with both hand and power tools. WoodEpox – Cold can be tinted with colored pigments as needed.
Technical Characteristics: 1:1 mixing ratio. Combine equal volumes of parts A and B until completely mixed and a uniform color is achieved. Pot life: approximately 25 minutes at 35° F. Hardens within 24 hours depending on temperature. Coverage: approximately 231 cubic inches per gallon. Waterproof. Beige, lightweight, non-slumping, epoxy putty adhesive. Apply by (gloved) hand or with a putty knife or trowel.
* WoodEpox – Cold is recommended for use in temperatures ranging from 35°F to 60°F (2°C – 16°C). For applications at higher temperatures, standard WoodEpox is recommended. WoodEpox – Cold has a limited shelf-life and should be used within six months of purchasing the product.
Typical Test Results | ||||
Kg/cm2 |
Mpa |
Psi |
||
Compressive Strength | 130 | 13 | 1,900 | |
Elongation | 1% | |||
Flexural Strength | 130 | 13 | 1,900 | |
Hardness, Shore D | 52 | |||
Pull-off Strength | 30 | 3.0 | 430 | |
Tensile Strength | 56 | 5.5 | 800 | |
The WoodEpox Cold works the same as our regular formula WoodEpox except you can apply it in temperatures as low as 35 degrees F.
Regular formula WoodEpox can be used in temps as low as 50 degrees F. It must be at least 50 F two hours prior to and 2 hours after application. Cooler temps will cause the product to cure slower. You can use direct heat to accelerate the curing process. WoodEpox Cold can be used in temps as low as 35 degrees F with the same instruction.
Yes.
The regular WoodEpox can be used in temperatures as low as 50 degrees F, the WoodEpox Cold can be used in temperatures as low as 35 degrees F. You may want to consider using the Aboweld 55-1, which is a no slump adhesive paste, for your repair. It can also be used in temperatures as low as 50 degrees F.
You can warm up the area with a blow dryer prior to application of the regular WoodEpox, apply the WoodEpox, and then apply direct heat to the product to accelerate the curing process. The WoodEpox Cold can be applied in temperatures as low as 35 degrees F.
Customer Reviews
There are no reviews yet.