Wood Restoration Kit

Conveniently Packaged Kit Containing the Essential Products for Restoring and Repairing Rotted, Deteriorated, or Damaged Wood: LiquidWood®, WoodEpox®, and Abosolv®.

Uses: LiquidWood is a penetrating epoxy wood consolidant, used to structurally harden, regenerate and waterproof decayed wood.  WoodEpox is a shrink-free epoxy putty used to fill, repair and replace missing wood, permanently.  Abosolv is a general purpose thinner and solvent for epoxy. It is used to thin LiquidWood when necessary and can also be used for general epoxy clean-up.

Use these products together to restore and repair wood on windowsills and frames, columns, doors, moldings, clapboards, balustrades, boats, furniture and anywhere wood needs to be strengthened or repaired.

Features and Benfits: LiquidWood and WoodEpox are 100% compatible, and when used together, they create structural, shrink-free, permanent repairs that mimic original wood.  They bond permanently even to previously damaged substrates and are resistant to further damage by water, insects, UV, and more.  Both products can be machined with traditional woodworking tools and are paintable just like wood. These products are proven by decades of exceptional performance and are continually specified for use on prominent and historic structures.  They are easy to use and produce professional results.  Abosolv is an ideal inclusion in the kit as a thinner for LiquidWood and a general cleaning and smoothing solvent for both LiquidWood and WoodEpox.

Available in three sizes, these kits contain LiquidWood Part A and Part B, WoodEpox Part A and Part B, and Abosolv.  Kit also contains disposable gloves, putty knife, mixing sticks, and instructions. Additional tools and accessories including measuring cups, disposable brushes, putty knives and more are available here.

Technical Characteristics: See individual product pages or download our technical data sheets for individual product specifications.

LiquidWood and WoodEpox are GREENGUARD® Certified meaning that they have been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).

(8 customer reviews)
DescriptionUnitQtyPrice
5 Pint
$89.65
5 Quart
$142.10
5 Gallon
$375.75

Wood Restoration with LiquidWood and WoodEpox

Learn the Basics - Mixing LiquidWood

Learn the Basics - Mixing WoodEpox

Customer Questions & Answers

    With 55-60 degree temperature outside how long should I wait after applying LiquidWood to sand?
  1. Q With 55-60 degree temperature outside how long should I wait after applying LiquidWood to sand? answer now
    Asked by Kristin Hurley on October 7, 2021 11:32 am
    Answered by the admin

    Keep checking it periodically, once it's hardened, you can sand it.

  2. I have a pergola built with cross notched 4 x 8 western cedar beams. Some of the end grain at the notches need help. I think the your Liquid Wood should be my first step, the Wood Epox to regain the original shape. I was told by a builder that I could make a plexiglass form to fasten around the end of the notch, then fill in behind it with the epoxy and it would not stick to the plexi. Your description says it will stick to anything. Which is correct? If it would does stick to plexi, can I coat it with anything so I can later remove the form? Thank you very much.
  3. Q I have a pergola built with cross notched 4 x 8 western cedar beams. Some of the end grain at the...... Read more answer now
    Asked by Charles Plemons on August 29, 2021 2:33 pm
    Answered by the admin

    You can use LiquidWood to consolidate any rotted wood and the WoodEpox to fill in any where you need to. The products will bond to anything except plastic. You can use a form and use some seran warp or a release agent so the products don't bond to your form.

  4. How long after applying the Liquid Wood can you apply the Woodepox? While it's still tacky? Similarly, how long before the Liquid Wood will accept paint/primer? Thanks in advance!
  5. Q How long after applying the Liquid Wood can you apply the Woodepox? While it's still tacky? Simil...... Read more answer now
    Asked by Matt on August 9, 2021 3:49 pm
    Answered by the admin The best time to apply WoodEpox is when LiquidWood is tacky and not completely hardened. Wait about 24 hours after the products have hardened to prime and/or paint. https://www.abatron.com/faqs/#wood_restoration
  6. Can this product be used to repair worn engineered flooring? If so can it be stained, and what product should be used?
  7. Q Can this product be used to repair worn engineered flooring? If so can it be stained, and what pr...... Read more answer now
    Asked by Elizabeth Schotta on August 7, 2021 10:53 am
    Answered by the admin We would need more clarification on your type of repair to answer the question correctly. Please call our technical department at 800-445-1754.
  8. Can this be used on partially rotted plywood subfloor? If yes, what size do i need for 4ft. 6in. by 1ft. 6in?
  9. Q Can this be used on partially rotted plywood subfloor? If yes, what size do i need for 4ft. 6in. ...... Read more answer now
    Asked by Denise Knight on July 19, 2021 12:43 pm
    Answered by the admin

    Yes, you can use the LiquidWood and WoodEpox to make your repair. 2 pints covers approximately 58 cubic inches, 2 quarts 116 cubic inches and 2 gallons 462 cubic inches. 

Send me a notification for each new answer.

Customer Reviews

  1. Larry

    The LiquidWood and WoodEpox products work great. It does require some practice to understand the cure rates, to have the right selection of applicator bottles, and to judge how best to time the changes in viscosity after mixing with the project needs. Also, WoodEpox is stainable, but in order to match adjacent wood, I have the best success in repairing mahogany floors and doors by reapplying stain directly on wet varnish using a cotton swab. That’s because the wiping step after staining will typically favor the removal of stain from the WoodEpox patch compared with the adjacent wood, and, later, the varnish brush will also typically further swipe away the stain from the WoodEpox patch. I have not tried the added pigment method (yet).

  2. Walt

    8 years ago, I repaired my Airstream travel trailer’s plywood floor. It had a hole rotted completely through and also an area around the wall perimeter at the rear corner. The perimeter of the wood subfloor was soft, with splintering and delaminated plywood layers. I decided to try the Abatron Wood Restoration Kit, the quarts size.
    First I dried the floor, following the instructions. Then I drill holes through the upper layers of the delaminate plywood, about 2″ to 3″ apart, so that the epoxy liquid could penetrate easily. Next I used the 2 part putty compound, reinforced with layers of fiberglass cloth, to fill in the 2″ x 8″ hole. Next, after mixing the 2 part epoxy liquid, I used a small tipped bottle to inject it into each drill hole. I went back to each hole multiple times, until no additional liquid would absorb. The whole surface of the soft area was completely wetted with the absorbed epoxy. The next day I had a solid floor!
    I have tow the trailer many thousands of miles since then, all over the USA from the Florida Keys to the north woods of Maine, from the Atlantic ocean to Yellow Stone and Glacier NP.
    The repair has held up under all the abuse I have given it. I am really happy that I made the repair this way.
    It saved me at least a thousand $, compared to replacing plywood.

  3. Robert Bordelon

    Excellent products for rotting exterior doors

  4. paul tharp

    used it before. great

  5. James Gwinn

    great stuff

  6. Dick Alderson

    Amazing product for rotting wood! Been using for 10 years.

  7. Jean Chester

    I have used this product for years and it has worked beautifully. Every time.

  8. Bob From Massachusetts

    I had my doubts that Abatrons Liquidwood and WoodEpox would work. I have two 4×6 posts on my screen porch with some rot. Using a dremel tool, I took out all the rotted wood. In addition, scraped off some of the paint. Not knowing how much LiquidWood to mix. I mixed 4oz of part A and B then applied. It was way more than I needed. Then waited for it to get tacky. Then I put on the gloves and mixed equal parts of the WoodEpox. Still having my Doubts that this lightweight stuff is going to work, I fill in the area with about the size of a softball with WoodEpox. I waited until the next morning it was dry and solid. So I sanded it and gave it a few coats of paint. I have to say Abatrons Liquidwood and WoodEpox is Amazing and easy to work with and it fixed my issue. Wow, this stuff is great.

Add a review

Your email address will not be published. Required fields are marked *