Wood Restoration Kit

Permanent Solution for Repairing Wood Rot or Decay and Replacing Damaged Wood

This kit conveniently packages together equal volumes of LiquidWood® A and B, WoodEpox® A and B, and Abosolv. Choose from 3 sizes. Kit also contains disposable gloves, putty knife, mixing sticks, and instructions.

LiquidWood is a deep penetrating epoxy wood hardener that consolidates, regenerates, and waterproofs rotted, decayed, or dried-out wood. It restores structural strength and durability to wood fibers.

WoodEpox is a shrink-free epoxy wood filler that can be used in any thickness to replace and repair wood. It bonds permanently and can be painted, stained, sanded and worked like wood.

Abosolv is a solvent for LiquidWood and also used for cleanup.

Uses: Use on windowsills and frames, columns, doors, moldings, clapboards, balustrades, furniture and anywhere wood is in need of strengthening and repair. The products are easy to use. LiquidWood and WoodEpox are 100% epoxy solids and contain no VOCs or water.  LiquidWood and WoodEpox are GreenGuard® Certified for very low, non-toxic emissions.

 

Rated 5.00 out of 5 based on 3 customer ratings
(3 customer reviews)
DescriptionUnitQtyPrice
5 Pint
$82.90
5 Quart
$128.90
5 Gallon
$339.90

Customer Questions & Answers

  1. Q How long after application of LiquidWood and WoodEpox does the weather have to stay dry for before it rains? Also, what is the minimum temperature it should be applied at?
    Answered by the admin

    It should be at least 50 degrees Fahrenheit several hours prior to and after application. The products should be hard to the touch prior to it getting wet.

  2. Q Priming with LiquidWood - the instructions say to apply the WoodEpoxy while the LiquidWood is "tacky". what is my "window" from the time apply the LiquidWood to the approximate time it is tacky and how long should that be (weather depending - I am in Ohio ~60 degrees these days)
    Answered by the admin

    Usually within about 1-3 hours.

  3. Q How long should i wait between layers of wood epox, about 1/4” think?
    Answered by the admin

    You don't have to wait for a certain amount of time, it will bond to itself.

  4. Q I looked in FAQ and in the above information but didn't see what is in the box. What is included in the Wood Restoration Kit? Thanks in advance
    Answered by the admin

    LiquidWood, WoodEpox and Abosolv.

  5. Q I need to cover 100 sq ft of repairs how much of the system (product) will I need to order
    Answered by the admin

    The coverage is as follows: 2 pt covers approx 58 cubic inches, 2 quarts approx 116 cubic inches, 2 gallons approx 462 cubic inches and 10 gallons approx 2310 cubic inches.

Send me a notification for each new answer.

Customer Reviews

  1. Rated 5 out of 5

    Bob From Massachusetts

    I had my doubts that Abatrons Liquidwood and WoodEpox would work. I have two 4×6 posts on my screen porch with some rot. Using a dremel tool, I took out all the rotted wood. In addition, scraped off some of the paint. Not knowing how much LiquidWood to mix. I mixed 4oz of part A and B then applied. It was way more than I needed. Then waited for it to get tacky. Then I put on the gloves and mixed equal parts of the WoodEpox. Still having my Doubts that this lightweight stuff is going to work, I fill in the area with about the size of a softball with WoodEpox. I waited until the next morning it was dry and solid. So I sanded it and gave it a few coats of paint. I have to say Abatrons Liquidwood and WoodEpox is Amazing and easy to work with and it fixed my issue. Wow, this stuff is great.

  2. Rated 5 out of 5

    Jean Chester

    I have used this product for years and it has worked beautifully. Every time.

  3. Rated 5 out of 5

    Dick Alderson

    Amazing product for rotting wood! Been using for 10 years.

Add a review

Your email address will not be published. Required fields are marked *