Wood Restoration Kit

Conveniently Packaged Kit Containing the Essential Products for Restoring and Repairing Rotted, Deteriorated, or Damaged Wood: LiquidWood®, WoodEpox®, and Abosolv®.

Uses: LiquidWood is a penetrating epoxy wood consolidant, used to structurally harden, regenerate and waterproof decayed wood.  WoodEpox is a shrink-free epoxy putty used to fill, repair and replace missing wood, permanently.  Abosolv is a general purpose thinner and solvent for epoxy. It is used to thin LiquidWood when necessary and can also be used for general epoxy clean-up.

Use these products together to restore and repair wood on windowsills and frames, columns, doors, moldings, clapboards, balustrades, boats, furniture and anywhere wood needs to be strengthened or repaired.

Features and Benfits: LiquidWood and WoodEpox are 100% compatible, and when used together, they create structural, shrink-free, permanent repairs that mimic original wood.  They bond permanently even to previously damaged substrates and are resistant to further damage by water, insects, UV, and more.  Both products can be machined with traditional woodworking tools and are paintable just like wood. These products are proven by decades of exceptional performance and are continually specified for use on prominent and historic structures.  They are easy to use and produce professional results.  Abosolv is an ideal inclusion in the kit as a thinner for LiquidWood and a general cleaning and smoothing solvent for both LiquidWood and WoodEpox.

Available in three sizes, these kits contain LiquidWood Part A and Part B, WoodEpox Part A and Part B, and Abosolv.  Kit also contains disposable gloves, putty knife, mixing sticks, and instructions. Additional tools and accessories including measuring cups, disposable brushes, putty knives and more are available here.

Technical Characteristics: See individual product pages or download our technical data sheets for individual product specifications.

LiquidWood and WoodEpox are GREENGUARD® Certified meaning that they have been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).

(8 customer reviews)
DescriptionUnitQtyPrice
5 Pint
$89.65
5 Quart
$142.10
5 Gallon
$375.75

Wood Restoration with LiquidWood and WoodEpox

Learn the Basics - Mixing LiquidWood

Learn the Basics - Mixing WoodEpox

Customer Questions & Answers

    I need to fill in the bottom of a rotted chair leg where some of the wood has chipped off. CanI use tape to make a framework to fill in with the WoodEpox to bring the leg back to its original length? Thank you.
  1. Q I need to fill in the bottom of a rotted chair leg where some of the wood has chipped off. CanI ...... Read more answer now
    Asked by Terry Goldman on May 25, 2021 11:33 pm
    Answered by the admin You can make a form of some sort if you'd like. You just want to be sure to use some type of release agent or seran wrap so the WoodEpox doesn't bond to your form.
  2. Hello! Can your product be stained once it's cured?
  3. Q Hello! Can your product be stained once it's cured? answer now
    Asked by Jennifer on April 28, 2021 8:50 am
    Answered by the admin WoodEpox can be stained after hardening with commercially available stains. You can also tint the WoodEpox with a dry powder pigment to help obtain a closer match.
  4. I am in Bucerias, Nayarit, México - near Puerto Vallarta. Do you know anyway that I could have your products shipped to me? I'd like the wood restoration kit. I can't locate it here.
  5. Q I am in Bucerias, Nayarit, México - near Puerto Vallarta. Do you know anyway that I could have...... Read more answer now
    Asked by linda Joy on April 16, 2021 3:00 pm
    Answered by the admin

    You can order directly from us and we can ship via UPS.

  6. Your products have come highly recommended by professionals who use it every day and I'm already chomping at the bit to give it a try on a 160 year old church window. In my research, I've heard two carpenters tout Bondo, but I've said no, because Bondo doesn't expand and contract like wood does. How do your products react when wood expands and contracts with the weather?
  7. Q Your products have come highly recommended by professionals who use it every day and I'm already ...... Read more answer now
    Asked by david murray on May 8, 2020 9:30 am
    Answered by the admin

    Our products allow for some expansion / contraction of the wood. WoodEpox contains no moisture and will not shrink away from the wood.

  8. I have the top of a decking joist that is partially rotted out and would like to know if a plywood form can be used to mimic the shape of the wood joist that is rotted and removed? If yes, is there anything that needs to be applied to the inside of the plywood form that will be in contact with the WoodEpox to allow it to release? If no, I assume the plywood form should be removed immediately after the WoodEpox is placed and its final shape?
  9. Q I have the top of a decking joist that is partially rotted out and would like to know if a plywoo...... Read more answer now
    Asked by Marc on May 6, 2020 7:14 pm
    Answered by the admin Yes, you can do as you described. You'll need to use some type of release agent. You can use something like butcher's wax, silicone spray, pam cooking spray or saran wrap.

Send me a notification for each new answer.

Customer Reviews

  1. Larry

    The LiquidWood and WoodEpox products work great. It does require some practice to understand the cure rates, to have the right selection of applicator bottles, and to judge how best to time the changes in viscosity after mixing with the project needs. Also, WoodEpox is stainable, but in order to match adjacent wood, I have the best success in repairing mahogany floors and doors by reapplying stain directly on wet varnish using a cotton swab. That’s because the wiping step after staining will typically favor the removal of stain from the WoodEpox patch compared with the adjacent wood, and, later, the varnish brush will also typically further swipe away the stain from the WoodEpox patch. I have not tried the added pigment method (yet).

  2. Walt

    8 years ago, I repaired my Airstream travel trailer’s plywood floor. It had a hole rotted completely through and also an area around the wall perimeter at the rear corner. The perimeter of the wood subfloor was soft, with splintering and delaminated plywood layers. I decided to try the Abatron Wood Restoration Kit, the quarts size.
    First I dried the floor, following the instructions. Then I drill holes through the upper layers of the delaminate plywood, about 2″ to 3″ apart, so that the epoxy liquid could penetrate easily. Next I used the 2 part putty compound, reinforced with layers of fiberglass cloth, to fill in the 2″ x 8″ hole. Next, after mixing the 2 part epoxy liquid, I used a small tipped bottle to inject it into each drill hole. I went back to each hole multiple times, until no additional liquid would absorb. The whole surface of the soft area was completely wetted with the absorbed epoxy. The next day I had a solid floor!
    I have tow the trailer many thousands of miles since then, all over the USA from the Florida Keys to the north woods of Maine, from the Atlantic ocean to Yellow Stone and Glacier NP.
    The repair has held up under all the abuse I have given it. I am really happy that I made the repair this way.
    It saved me at least a thousand $, compared to replacing plywood.

  3. Robert Bordelon

    Excellent products for rotting exterior doors

  4. paul tharp

    used it before. great

  5. James Gwinn

    great stuff

  6. Dick Alderson

    Amazing product for rotting wood! Been using for 10 years.

  7. Jean Chester

    I have used this product for years and it has worked beautifully. Every time.

  8. Bob From Massachusetts

    I had my doubts that Abatrons Liquidwood and WoodEpox would work. I have two 4×6 posts on my screen porch with some rot. Using a dremel tool, I took out all the rotted wood. In addition, scraped off some of the paint. Not knowing how much LiquidWood to mix. I mixed 4oz of part A and B then applied. It was way more than I needed. Then waited for it to get tacky. Then I put on the gloves and mixed equal parts of the WoodEpox. Still having my Doubts that this lightweight stuff is going to work, I fill in the area with about the size of a softball with WoodEpox. I waited until the next morning it was dry and solid. So I sanded it and gave it a few coats of paint. I have to say Abatrons Liquidwood and WoodEpox is Amazing and easy to work with and it fixed my issue. Wow, this stuff is great.

Add a review

Your email address will not be published. Required fields are marked *