Wood Restoration Kit
Conveniently Packaged Kit Containing the Essential Products for Restoring and Repairing Rotted, Deteriorated, or Damaged Wood: LiquidWood®, WoodEpox®, and Abosolv®.
Uses: LiquidWood is a penetrating epoxy wood consolidant, used to structurally harden, regenerate and waterproof decayed wood. WoodEpox is a shrink-free epoxy putty used to fill, repair and replace missing wood, permanently. Abosolv is a general purpose thinner and solvent for epoxy. It is used to thin LiquidWood when necessary and can also be used for general epoxy clean-up.
Use these products together to restore and repair wood on windowsills and frames, columns, doors, moldings, clapboards, balustrades, boats, furniture and anywhere wood needs to be strengthened or repaired.
Features and Benfits: LiquidWood and WoodEpox are 100% compatible, and when used together, they create structural, shrink-free, permanent repairs that mimic original wood. They bond permanently even to previously damaged substrates and are resistant to further damage by water, insects, UV, and more. Both products can be machined with traditional woodworking tools and are paintable just like wood. These products are proven by decades of exceptional performance and are continually specified for use on prominent and historic structures. They are easy to use and produce professional results. Abosolv is an ideal inclusion in the kit as a thinner for LiquidWood and a general cleaning and smoothing solvent for both LiquidWood and WoodEpox.
Available in three sizes, these kits contain LiquidWood Part A and Part B, WoodEpox Part A and Part B, and Abosolv. Kit also contains disposable gloves, putty knife, mixing sticks, and instructions. Additional tools and accessories including measuring cups, disposable brushes, putty knives and more are available here.
Technical Characteristics: See individual product pages or download our technical data sheets for individual product specifications.
LiquidWood and WoodEpox are GREENGUARD® Certified meaning that they have been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
Wood Restoration with LiquidWood and WoodEpox
Learn the Basics - Mixing LiquidWood
Learn the Basics - Mixing WoodEpox
Customer Questions & Answers
With 55-60 degree temperature outside how long should I wait after applying LiquidWood to sand?
Q With 55-60 degree temperature outside how long should I wait after applying LiquidWood to sand? answer nowAsked by October 7, 2021 11:32 amonAnswered by the admin
Keep checking it periodically, once it's hardened, you can sand it.
I have a pergola built with cross notched 4 x 8 western cedar beams. Some of the end grain at the notches need help. I think the your Liquid Wood should be my first step, the Wood Epox to regain the original shape. I was told by a builder that I could make a plexiglass form to fasten around the end of the notch, then fill in behind it with the epoxy and it would not stick to the plexi. Your description says it will stick to anything. Which is correct? If it would does stick to plexi, can I coat it with anything so I can later remove the form? Thank you very much.
Q I have a pergola built with cross notched 4 x 8 western cedar beams. Some of the end grain at the...... Read more answer nowAsked by August 29, 2021 2:33 pmonAnswered by the admin
You can use LiquidWood to consolidate any rotted wood and the WoodEpox to fill in any where you need to. The products will bond to anything except plastic. You can use a form and use some seran warp or a release agent so the products don't bond to your form.
How long after applying the Liquid Wood can you apply the Woodepox? While it's still tacky? Similarly, how long before the Liquid Wood will accept paint/primer? Thanks in advance!
Q How long after applying the Liquid Wood can you apply the Woodepox? While it's still tacky? Simil...... Read more answer nowAsked by August 9, 2021 3:49 pmonAnswered by the admin The best time to apply WoodEpox is when LiquidWood is tacky and not completely hardened. Wait about 24 hours after the products have hardened to prime and/or paint. https://www.abatron.com/faqs/#wood_restoration
Can this product be used to repair worn engineered flooring? If so can it be stained, and what product should be used?
Q Can this product be used to repair worn engineered flooring? If so can it be stained, and what pr...... Read more answer nowAsked by August 7, 2021 10:53 amonAnswered by the admin We would need more clarification on your type of repair to answer the question correctly. Please call our technical department at 800-445-1754.
Can this be used on partially rotted plywood subfloor? If yes, what size do i need for 4ft. 6in. by 1ft. 6in?
Q Can this be used on partially rotted plywood subfloor? If yes, what size do i need for 4ft. 6in. ...... Read more answer nowAsked by July 19, 2021 12:43 pmonAnswered by the admin
Yes, you can use the LiquidWood and WoodEpox to make your repair. 2 pints covers approximately 58 cubic inches, 2 quarts 116 cubic inches and 2 gallons 462 cubic inches.