Rust Converter

Rust Converter is a liquid surface conditioner and primer that converts existing rust into an inert, protective coating that seals out moisture and corrosion. No sanding or etching required. Unlike other products, it is not a simple cleaner or cover up. The special formula attacks rust at the chemical level for fast, long-lasting results. Treated surfaces turn matte black, and can be left as-is or painted with an oil-based paint for even longer protection against new rust. Ideal for treating smaller surfaces with a brush or roller, or spraying directly from the bottle.

Packaging: 1 Quart

(2 customer reviews)
DescriptionUnitQtyPrice
$30.05

Customer Questions & Answers

    Would rust converter work on an old porcelain bathtub?
  1. Q Would rust converter work on an old porcelain bathtub? answer now
    Asked by Anne Boccieri on September 3, 2021 2:53 pm
    Answered by the admin

    No.

  2. How long can I wait to do a 2nd coat or 3rd??
  3. Q How long can I wait to do a 2nd coat or 3rd?? answer now
    Asked by James Ulavege on April 27, 2021 11:09 am
    Answered by the admin Here are the instructions: Shake solution well Wear rubber gloves Always test on an inconspicuous area for colorfastness and suitability Spray a small amount on a dry rust stain – a little goes a long way Rinse Magica Rust Remover spray with water – no rub or scrub needed It’s that simple! If our Magica formula doesn’t remove the stain, then it is not rust.
    Answered by the admin Directions-Complete directions on product label Apply two coats allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying an oil-based paint.
  4. once you apply the product, how long should be waited until painted with oil base product?
  5. Q once you apply the product, how long should be waited until painted with oil base product? answer now
    Asked by Ron on August 2, 2019 10:29 am
    Answered by the admin

    48 hours

  6. What is the approximate coverage in square feet?
  7. Q What is the approximate coverage in square feet? answer now
    Asked by Charles Wolfe on July 21, 2019 2:50 pm
    Answered by the admin

     Rust converter coverage is 500 sq. ft./gallon appx.

  8. will your ferrobond P and L series work on the metal after this product is applied?
  9. Q will your ferrobond P and L series work on the metal after this product is applied? answer now
    Asked by Louis on May 30, 2019 10:26 am
    Answered by the admin

    Yes

Send me a notification for each new answer.

Customer Reviews

  1. ABATRON

    We only stock this item in the quart size.

  2. Don

    and where are the gallon prices on your website ?

  3. Charles E. Belles

    I have used this product. I was very very satisfied. It converted the rust which permitted me to paint. It has held up very well. I now have another rust project which is why am ordering another quart.

Add a review

Your email address will not be published. Required fields are marked *