Multi-Glaze Type M Glazing Compound

Sarco Multi-Glaze Type M Glazing Compound. 

Quickest surface skinning product for inside shop use only. 

Sarco Multi-Glaze Type M is the best traditional knife grade linseed oil glazing compound available for glazing and bedding glass in wood sash and doors. Type M is the quickest surface skinning product and forms a strong surface skin in one week depending on temperatures. It remains elastic and flexible throughout its lifetime. Type M is for inside shop glazing only. Give Type M at least 14 days to cure before painting with oil or latex paint.

 

(2 customer reviews)
DescriptionUnitQtyPrice
1 Gallon
$53.50

Customer Questions & Answers

  1. Q After the skinning over period and painting, can the window be reinstalled in the winter time? Will it fully cure in cold climate?
    Answered by the admin

    Yes.

  2. Q What is recommended for number of coats of paint on the glazing? 1 or 2. No primer correct..?
    Answered by the admin

    Do not prime the putty. There is no recommended amount of coats of paint required and/or suggested.

  3. Q How do I clean up after using Type M? Both on tools and on my hands! Thank you.
    Answered by the admin

    You can use hot, soapy water or rubbing alcohol or mild solvent that won't irritate the hands.

  4. Q what is meant by inside shop glazing only on type M? Does that mean it should not be used on storm windows?
    Answered by the admin

    Type M must be used in doors and the windows needs to stay in doors until it skins over. Once it skins over you can place the window outside. So you can apply to your storm window, but it must be done inside and kept inside until skinned over.

  5. Q About how many feet of windows will a gallon gover
    Answered by the admin

    For 1/2" sash approximately 6 feet glazing for 1 pound of putty. Each one gallon can weighs about 18 pounds.

Send me a notification for each new answer.

Customer Reviews

  1. Mark N

    We restore historic wooden windows – This is our favorite

  2. Mike

    So far, this stuff is horrible. It’s extremely sticky and nearly to impossible to use. Cleanup of tools and my hands was very difficult. I would accept the stickiness if the instructions mentioned this possibility and what to do about it. The problem is there are no instructions. The side of the tub has only one sentence about allowing it to skim over before painting and that’s it. It’s possible that detailed instructions that cover common problems are available somewhere but, after searching the internet, I haven’t found it. I have found conflicting advice, however. This product should at least come with much more detailed instructions, rather than appearing to cater only to those who have been glazing windows for 30 years. I bought it because the DAP glazing compound is so maligned on the internet. I can’t imagine anything being worse than the Sarco putty.

    • ABATRON

      Please call our technical department at 800-445-1754 for assistance.

Add a review

Your email address will not be published. Required fields are marked *