MasterMold 12-3®
Makes Molds of Any Size for Architectural and Artistic Reproductions.
Uses: Build up this flexible polyurethane mold-making paste in one application to replicate intricately detailed architectural elements. Use on both vertical and overhead surfaces. Designed for making molds of elements that cannot be removed from the structure, as well as molds with severe undercuts, including: busts, statues, finials, reliefs, and furniture parts where a one part mold is desirable. Other typical uses include reproducing capitals, ceiling medallions, corbels, moldings, figurines, and other three dimensional objects. Molds are reusable.
Features and Benefits: MasterMold 12-3 is easily spread on the model to produce a smooth, bubble-free mold surface that captures the finest details. The molds are ready to use in less than one day. Its elasticity, softness, and high strength permit easy peeling from intricate shapes. Support molds for supporting the flexible mold while casting, can be made with plaster, WoodEpox®, or resin/fiberglass techniques. Release agent is necessary for both the model and when casting the mold in most instances. A release agent is not necessary for water-based casting materials.
Technical Characteristics: Hardens in 8-12 hours at room temperature. Easy proportioning of 1 part resin to 1 part hardener by volume.
Download
TYPICAL TEST RESULTS
Kg/cm2 |
Mpa |
Psi |
||
Elongation | >600% | |||
Hardness, Shore A | 38 | |||
Tensile Strength | 12.7 | 180 | ||
Customer Questions & Answers
-
Is there shrinkage from the original item to a reproduction of that item?
-
Q Is there shrinkage from the original item to a reproduction of that item? answer nowAsked by March 29, 2022 9:01 pmonAnswered by the admin
no
I need to replicate round feet on a cabinet. Several have rotted out and off. I was going to use the liquid wood and then the mold with wood epox to build up the feet. Will mastermold work for this?
-
Q I need to replicate round feet on a cabinet. Several have rotted out and off. I was going to use ...... Read more answer nowAsked by August 3, 2019 12:43 pmonAnswered by the admin
You can make a mold of the item you wish to replicate with the MasterMold.
Looking for a cost effective solution to replicating several terra cotta corinthian capitals that cap composite windows on a c. 1900 residence.
-
Q Looking for a cost effective solution to replicating several terra cotta corinthian capitals that...... Read more answer nowAsked by September 28, 2018 10:39 amonAnswered by the admin
Please call our technical department at 800-445-1754.
Answered by the adminPlease call our technical department at 800-445-1754.
Answered by the adminPlease send your photos and details of dimenstions to info@abatron.com.
Looking for supplier in Canada.Thanks
-
Answered by the admin
The Mastermold 12-3 is not available at any of our dealers. You can order it directly from us. We ship orders via UPS.
What size kit do I need for making a mold for crown moulding that is 5" wide 2" deep and 8' long
-
Q What size kit do I need for making a mold for crown moulding that is 5" wide 2" deep and 8' long answer nowAsked by August 29, 2017 7:55 pmonA You will need at least one 2 gallon kit. If you would like help calculating the volume needed please call customer service at 800/445-1754.
Customer Reviews
There are no reviews yet.