LiquidWood®

Restore Strength to Rotted Wood.
all3sills

Uses: LiquidWood strengthens decayed wood indoors and outdoors, structural and decorative. Use on buildings, boats, windows, columns, decks, and any wooden architectural elements. Use also as a primer for WoodEpox®.

Features & Benefits: LiquidWood epoxy consolidant permanently restores structural strength and durability to rotted, decayed, or dried out wood. LiquidWood penetrates deeply into wood fibers to solidify deteriorated wood without the need to remove and cut out the areas that can be effectively consolidated. With LiquidWood, a piece of deteriorated wood that could crumble under finger pressure can be restored to rigid, high-strength, durable, water and weather-resistant wood. Treated wood can be: sawed, planed, drilled, nailed, painted, routed, or sanded.

Technical Characteristics: Easy to use, simply stir together equal parts A and B until fully blended. Treated wood will harden within hours. Pot life: 30 minutes. 100% epoxy solids. LiquidWood contains no VOCs or noxious odors. GREENGUARD certified®

This product is GreenGuard® Certified, meaning that it has been found to contain virtually no VOC’s (volatile organic compounds).

Rated 4.50 out of 5 based on 6 customer ratings
(6 customer reviews)
DescriptionUnitQtyPrice
2 Pint
$40.55
2 Quart
$73.25
2 Gallon
$188.70
10 Gallon
$771.30

TYPICAL TEST RESULTS

    Kg/cm2 Mpa Psi
Compressive Strength   366 36 5210
Elongation 84%      
Flexural Strength   63 6.2 900
Hardness, Shore D 42      
Tensile Strength   103 10.1 1460

Wood Restoration with LiquidWood and WoodEpox

Customer Questions & Answers

  1. Q I have exterior stairs that are cracked from exposure. Can this be used as a filler sanded and repainted?
    Answered by the admin

    LiquidWood is a consolidant for rotted wood. WoodEpox is the filler for wood.

  2. Q How long does it take for Liquid Wood to become un-tacky and sand-able?
    Answered by the admin

    24 hours

  3. Q I have two five gallon containers, both parts, leftover from a commercial project. They are about 2/3 full. I would like to use them to flood coat a raised panel door - fill in the recessed areas. I understand that it is not a clear finish, & that's not a problem. I will first pour a thin layer to seal everything & to deal with bubbles. After that, can I pour the remaining areas in one coat? Some areas will be 1/2" thick. Or, do I need to pour thin 1/4" thick coats?
    Answered by the admin

    LiquidWood is a consolidant for rotted wood. It's designed to soak into the rotted wood and make it hard again. We do not recommend it be used as a protective coating or sealant type product.

  4. Q is liquid wood strong enough to 'glue' a broken axe or maul handle back together after breaking off at the head from dry rot?
    Answered by the admin

    We have not tested it in this manor. It's primarily a consolidant for rotted wood. We have other adhesives. Please call our technical department at 800-445-1754 for assistance.

  5. Q Is Liquid Wood compatible with West System epoxy, which I own along with low density filler?
    Answered by the admin We do not test our products with competitor products.

Send me a notification for each new answer.

Customer Reviews

  1. Rated 5 out of 5

    James Listman

    This stuff is a mandatory for anyone with an older home trying to maintain old sills etc. Making sure the old wood is dry is critical. It sucks right in and truly does make the original better!

  2. Rated 3 out of 5

    eugene weddle

    good

  3. Rated 5 out of 5

    Laurel

    none better!

  4. Rated 4 out of 5

    Anthony Smiley

    I use the Wood sealer 1st . Then I used the wood filler. Both products were easy to work with. I was repairing a rotted 2 by 12 joist. The wood sealer made the would extremely hard again. I then use the would filler to fill in the large Spaces. The A and B wood filler was like playing with clay . Very easy to use. I will give it a five star after I sand and shape the wood. Ps I have pictures if you would like to see them. Let me know.

  5. Rated 5 out of 5

    Chiya

    I have soft spots in my floorboards throughout my custom renovated home. The top layer of teak flooring is in great shape. Can I somehow inject the liquid hardener into the soft spots to fix the rotted boards below?

    • ABATRON

      Yes, you can drill holes and inject the LiquidWood.

  6. Rated 5 out of 5

    Ed

    what is the ration of liquid wood to the beam one would be working with?

    • ABATRON

      It’s hard to say how much LiquidWood will absorb into the rotted wood because we don’t know the extent of the rot. You should keep brushing it on and/or injecting it until the product pools on the top, then you know you’ve applied enough product.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…