Structural Epoxy Wood Hardener and Consolidant for Deteriorated Wood.
Uses: LiquidWood® penetrates wood fibers and structurally hardens decayed and weathered wood permanently. Use indoors and outdoors and on both structural and decorative wood. Use to harden and restore wood on buildings, windows, columns, beams, decks, boats, furniture, artwork, and any wooden architectural elements. Use also as a primer or thinner for WoodEpox®.
Features & Benefits: LiquidWood epoxy wood consolidant is easy to use and produces permanent results. Its low viscosity allows it to penetrate deep into the wood and saturate deteriorated wood fibers prior to hardening. This eliminates the need to remove the areas that can be effectively consolidated. With LiquidWood, deteriorated wood that could crumble under finger pressure can be restored to structural, high-strength, durable, weather and insect-resistant wood. The absence of water and solvents eliminates shrinkage and enhances adhesion. It is low odor and produces virtually zero VOCs, making it safe and hazard-free in any environment. Treated wood will harden within hours, and like new wood, can easily be sawed, planed, drilled, nailed, painted, routed, and sanded.
Technical Characteristics: 1:1 mixing ratio. Combine equal parts A and B until fully blended. Pot life: approximately 30 minutes. Hardens within hours depending on temperature and other environmental factors. 100% epoxy solids. Waterproof. Coverage: 231 cubic inches per gallon. Effective coverage varies based on the porosity of the wood. Translucent amber color liquid resin. Apply by brushing, pouring, or injecting directly onto dry, bare wood. Application temperature range: 50-90° F. 100% compatible with WoodEpox.
Cold weather formulation is available for application temperatures as low as 35° F.
This product is GREENGUARD® Certified, meaning that it has been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
TYPICAL TEST RESULTS
|Hardness, Shore D||42|
Wood Restoration with LiquidWood and WoodEpox
Learn the Basics - Mixing LiquidWood
Customer Questions & Answers
How do you use LiquidWood to thin WoodEpox? Part A Part B or a mix of both?
Q How do you use LiquidWood to thin WoodEpox? Part A Part B or a mix of both? answer nowAsked by July 26, 2022 4:39 pmonAnswered by the admin Mix LiquidWood A & B together, mix WoodEpox A & B together, then mix the 2 mixed products together for your desired consistency.
Will temperatures over 90 degrees affect the curing of liquidwood or woodepoxy? I will apply both products in the morning at temps between 60-90 F but the south side of my building will get much hotter in the afternoon.
- Do I need to wear a respirator while applying LiquidWood outdoors? If so do you know what cartridge rating is required?
- I have a white cedar log home. A couple of my logs have some soft spots. Can you use an oil based wood preserver after using LiquidWood to hardened these soft spots.
- What do I use to clean up brushes or off skin?
Q What do I use to clean up brushes or off skin? answer nowAsked by July 10, 2022 3:00 pmonAnswered by the admin
You can use acetone, xylene or alcohol to clean your brushes. For you skin you could use hot soapy water.