Structural Epoxy Wood Hardener and Consolidant for Deteriorated Wood.
Uses: LiquidWood® penetrates wood fibers and structurally hardens decayed and weathered wood permanently. Use indoors and outdoors and on both structural and decorative wood. Use to harden and restore wood on buildings, windows, columns, beams, decks, boats, furniture, artwork, and any wooden architectural elements. Use also as a primer or thinner for WoodEpox®.
Features & Benefits: LiquidWood epoxy wood consolidant is easy to use and produces permanent results. Its low viscosity allows it to penetrate deep into the wood and saturate deteriorated wood fibers prior to hardening. This eliminates the need to remove the areas that can be effectively consolidated. With LiquidWood, deteriorated wood that could crumble under finger pressure can be restored to structural, high-strength, durable, weather and insect-resistant wood. The absence of water and solvents eliminates shrinkage and enhances adhesion. It is low odor and produces virtually zero VOCs, making it safe and hazard-free in any environment. Treated wood will harden within hours, and like new wood, can easily be sawed, planed, drilled, nailed, painted, routed, and sanded.
Technical Characteristics: 1:1 mixing ratio. Combine equal parts A and B until fully blended. Pot life: approximately 30 minutes. Hardens within hours depending on temperature and other environmental factors. 100% epoxy solids. Waterproof. Coverage: 231 cubic inches per gallon. Effective coverage varies based on the porosity of the wood. Translucent amber color liquid resin. Apply by brushing, pouring, or injecting directly onto dry, bare wood. Application temperature range: 50-90° F. 100% compatible with WoodEpox.
Cold weather formulation is available for application temperatures as low as 35° F.
This product is GREENGUARD® Certified, meaning that it has been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
TYPICAL TEST RESULTS
|Hardness, Shore D||42|
Wood Restoration with LiquidWood and WoodEpox
Learn the Basics - Mixing LiquidWood
Customer Questions & Answers
If I use a wood preservative/mold stop solution such as Woodlife copper coat or Boracare, Can I use the liquid wood to solidify the wood once the preservative has completely dried?
Thanks in advance.
- If Liquid Wood is applied to good, solid wood and remains tacky and on the surface as noted in other questions, what’s the best way to remove that tacky layer? Sand it off? Thank you.
- Can you mail into hardened LiquedWood?
Q Can you mail into hardened LiquedWood? answer nowAsked by May 11, 2022 12:01 pmonAnswered by the admin
Can your Liquid Wood /Wood Epox combo be used for laminate countertop pressed
board? It is the area where dishwasher screws under counter. Does the product indicate
maximum area which can be rebuilt in sq/in (or volume cu/in)?
Q Can your Liquid Wood /Wood Epox combo be used for laminate countertop pressed board? It is the a...... Read more answer nowAsked by May 6, 2022 10:12 amonAnswered by the admin
LiquidWood is a consolidant for rotted, soft, spongy wood. It is not a protectorant type coating and/or laminating type product. If you apply it to good, solid wood, it will remain on the surface and remain tacky. WoodEpox is used to fill in missing areas in wood.
Does this this product generate heat as it cures? And if so how much.
I have a log home and this is an exterior beam.