LiquidWood®

Restore Strength to Rotted Wood.
all3sills

Uses: LiquidWood strengthens decayed wood indoors and outdoors, structural and decorative. Use on buildings, boats, windows, columns, decks, and any wooden architectural elements. Use also as a primer for WoodEpox®.

Features & Benefits: LiquidWood epoxy consolidant permanently restores structural strength and durability to rotted, decayed, or dried out wood. LiquidWood penetrates deeply into wood fibers to solidify deteriorated wood without the need to remove and cut out the areas that can be effectively consolidated. With LiquidWood, a piece of deteriorated wood that could crumble under finger pressure can be restored to rigid, high-strength, durable, water and weather-resistant wood. Treated wood can be: sawed, planed, drilled, nailed, painted, routed, or sanded.

Technical Characteristics: Easy to use, simply stir together equal parts A and B until fully blended. Treated wood will harden within hours. Pot life: 30 minutes. 100% epoxy solids. LiquidWood contains no VOCs or noxious odors. GREENGUARD certified®

This product is GreenGuard® Certified, meaning that it has been found to contain virtually no VOC’s (volatile organic compounds).

(12 customer reviews)
DescriptionUnitQtyPrice
2 Pint
$41.50
2 Quart
$74.50
2 Gallon
$191.90
10 Gallon
$786.75

TYPICAL TEST RESULTS

    Kg/cm2 Mpa Psi
Compressive Strength   366 36 5210
Elongation 84%      
Flexural Strength   63 6.2 900
Hardness, Shore D 42      
Tensile Strength   103 10.1 1460

Wood Restoration with LiquidWood and WoodEpox

Questions and answers of the customers

  1. A

    LiquidWood is a consolidant for rotted wood, it's not a filler product unless you mix something fibrous with like, for example, sawdust. Also, LiquidWood does not accept a stain. Our filler product is WoodEpox. You can thin the WoodEpox with LiquidWood to any consistency you'd like. WoodEpox accepts a stain on the surface, but stain does not soak into it like a regular piece of wood. You can also tint the WoodEpox with a dry powder pigment.

  2. A

    Yes, you can use the LiquidWood and WoodEpox for your repairs. The wood must contain less than 17% moisture.

  3. A

    You can use the LiquidWood to consolidate any rotted wood. It's the consistency of honey. You can brush it on or drill holes at a 45 degree angel and inject it.

  4. A

    We would suggest you mix a small amount of Part A & Part B together and see if they cure properly. Older product will take much longer to cure than newer product. If it cures properly, you should be ok to use it.

  5. A Yes. You can use LiquidWood to harden any soft and/or rotted wood and the WoodEpox to fill any voids.

Customer Reviews

  1. James Listman

    This stuff is a mandatory for anyone with an older home trying to maintain old sills etc. Making sure the old wood is dry is critical. It sucks right in and truly does make the original better!

  2. eugene weddle

    good

  3. Laurel

    none better!

  4. Anthony Smiley

    I use the Wood sealer 1st . Then I used the wood filler. Both products were easy to work with. I was repairing a rotted 2 by 12 joist. The wood sealer made the would extremely hard again. I then use the would filler to fill in the large Spaces. The A and B wood filler was like playing with clay . Very easy to use. I will give it a five star after I sand and shape the wood. Ps I have pictures if you would like to see them. Let me know.

  5. Chiya

    I have soft spots in my floorboards throughout my custom renovated home. The top layer of teak flooring is in great shape. Can I somehow inject the liquid hardener into the soft spots to fix the rotted boards below?

    • ABATRON

      Yes, you can drill holes and inject the LiquidWood.

  6. Ed

    what is the ration of liquid wood to the beam one would be working with?

    • ABATRON

      It’s hard to say how much LiquidWood will absorb into the rotted wood because we don’t know the extent of the rot. You should keep brushing it on and/or injecting it until the product pools on the top, then you know you’ve applied enough product.

  7. Donald Chester

    I have used LiquidWood for years in restoration projects in and around my circa 1865 farmhouse and circa 1930 outbuilding. I prefer to make my own filler by mixing LiquidWood with fine sawdust, since after sanding, the colour comes out close to that of the surrounding wood even before finishing; sometimes it is hard to see where the repair was made, for example, where I repaired a burnt spot in my oak hardwood floor from an errant ember from the wood stove. I have used this method outdoors to repair rotted window sills and siding. It doesn’t shrink and after more than a decade, no cracks have appeared between filler and sound wood. Filled spots take paint just like original wood.

  8. Cheri

    I’ve used Abatron products in many areas as we’ve slowly restored our circa 1900 home. It’s easy to use, works perfectly, and has saved us a lot of money and hard work because we’ve restored the original wood parts – rather than replacing them.

  9. Sandy Douglass

    Can this be sprayed onto the wood? I have rotted particle board with is slightly slanted overhead. I’ve not used this product yet so I just picked 3 stars.

    • ABATRON

      It’s the consistency of honey, no really sprayable.

  10. Zen Libowicz

    Can these products be mixed with sand?

    • ABATRON

      No, you can mix it with sawdust.

  11. Wayne Murray

    I own a cabin that only has 6” logs that are dry rotted. This product is awesome!! Can’t say enough about how great it is to work with!! I ordered a small amount to see how it would work out!! Best thing I ever did!! Worth every penny!!

  12. Pam

    I’m a homeowner and had a cracked and badly weathered window sill which I just repaired with the LiquidWood and WoodEpox. It was very easy to work with and sanded beautifully. It is ready to paint but I have a question. In sanding down an area where the WoodEpox was very thin, I sanded off the nearby LiquidWood and now there’s raw wood laid bare. Can I reapply the LiquidWood to the bare wood and over the sanded WoodEpox? Thanks.

    • ABATRON

      No. If you apply LiquidWood to a good, solid surface, it will remain on the surface and remain tacky.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…