Structural Epoxy Wood Hardener and Consolidant for Deteriorated Wood.
Uses: LiquidWood® penetrates wood fibers and structurally hardens decayed and weathered wood permanently. Use indoors and outdoors and on both structural and decorative wood. Use to harden and restore wood on buildings, windows, columns, beams, decks, boats, furniture, artwork, and any wooden architectural elements. Use also as a primer or thinner for WoodEpox®.
Features & Benefits: LiquidWood epoxy wood consolidant is easy to use and produces permanent results. Its low viscosity allows it to penetrate deep into the wood and saturate deteriorated wood fibers prior to hardening. This eliminates the need to remove the areas that can be effectively consolidated. With LiquidWood, deteriorated wood that could crumble under finger pressure can be restored to structural, high-strength, durable, weather and insect-resistant wood. The absence of water and solvents eliminates shrinkage and enhances adhesion. It is low odor and produces virtually zero VOCs, making it safe and hazard-free in any environment. Treated wood will harden within hours, and like new wood, can easily be sawed, planed, drilled, nailed, painted, routed, and sanded.
Technical Characteristics: 1:1 mixing ratio. Combine equal parts A and B until fully blended. Pot life: approximately 30 minutes. Hardens within hours depending on temperature and other environmental factors. 100% epoxy solids. Waterproof. Coverage: 231 cubic inches per gallon. Effective coverage varies based on the porosity of the wood. Translucent amber color liquid resin. Apply by brushing, pouring, or injecting directly onto dry, bare wood. Application temperature range: 50-90° F. 100% compatible with WoodEpox.
Cold weather formulation is available for application temperatures as low as 35° F.
This product is GREENGUARD® Certified, meaning that it has been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
TYPICAL TEST RESULTS
|Hardness, Shore D||42|
Wood Restoration with LiquidWood and WoodEpox
Learn the Basics - Mixing LiquidWood
Customer Questions & Answers
How long does this treatment last?
I just replaced a window sill treated with epoxy in the 1990's. The epoxy was there, but the sill was rotten and gone under it. The owner said it was a restoration epoxy.
Q How long does this treatment last? I just replaced a window sill treated with epoxy in the 199...... Read more answer nowAsked by January 15, 2022 7:12 pmonAnswered by the admin
If our products are applied, correctly, according to the instructions, it should be a permanent repair in the area where the product is applied.
Can I blend LiquidWood with sawdust and use it as a structural filler?
Q Can I blend LiquidWood with sawdust and use it as a structural filler? answer nowAsked by January 10, 2022 9:16 amonAnswered by the admin
I'd like to use Liquid Wood to consolidate rotted, soft, spongy wood "art" piece. How can I keep the surface looking "as found" without discoloration while it strengthens the structure of the wood?
Q I'd like to use Liquid Wood to consolidate rotted, soft, spongy wood "art" piece. How can I keep ...... Read more answer nowAsked by December 9, 2021 4:57 pmonAnswered by the admin
You can try injecting the product, but any product that is on the surface of you project will be a clear amber color.
we're preparing to sell. I'm 74 Sarah is 72. We are a little strapped for money.
do you have a smaller package such as a pint? Or could you send me a pint if I ordered one?
Thanks so much for your help.
Q we're preparing to sell. I'm 74 Sarah is 72. We are a little strapped for money. do you have a s...... Read more answer nowAsked by December 5, 2021 9:14 amonAnswered by the admin
The smallest size LiquidWood you can order is our 2 pint size, which includes the Part A & B. The cost is $45.75 plus shipping. You could also check our dealer locator to see if you can purchase it locally.
I have a 2-1/2”x 7-1/2”x 60” cedar board I’m going to use for a fireplace mantle. It has been planed and will be sanded and sealed before installing.
The board has a few thin cracks on the bottom side that I want to seal. Is your liquid wood product a good choice for that?