Restore Strength to Rotted Wood.
Uses: LiquidWood strengthens decayed wood indoors and outdoors, structural and decorative. Use on buildings, boats, windows, columns, decks, and any wooden architectural elements. Use also as a primer for WoodEpox®.
Features & Benefits: LiquidWood epoxy consolidant permanently restores structural strength and durability to rotted, decayed, or dried out wood. LiquidWood penetrates deeply into wood fibers to solidify deteriorated wood without the need to remove and cut out the areas that can be effectively consolidated. With LiquidWood, a piece of deteriorated wood that could crumble under finger pressure can be restored to rigid, high-strength, durable, water and weather-resistant wood. Treated wood can be: sawed, planed, drilled, nailed, painted, routed, or sanded.
Technical Characteristics: Easy to use, simply stir together equal parts A and B until fully blended. Treated wood will harden within hours. Pot life: 30 minutes. 100% epoxy solids. LiquidWood contains no VOCs or noxious odors. GREENGUARD certified®
This product is GreenGuard® Certified, meaning that it has been found to contain virtually no VOC’s (volatile organic compounds).
TYPICAL TEST RESULTS
|Hardness, Shore D||42|
Wood Restoration with LiquidWood and WoodEpox
Customer Questions & Answers
Q I have exterior stairs that are cracked from exposure. Can this be used as a filler sanded and repainted?Answered by the admin
LiquidWood is a consolidant for rotted wood. WoodEpox is the filler for wood.
Q How long does it take for Liquid Wood to become un-tacky and sand-able?Answered by the admin
Q I have two five gallon containers, both parts, leftover from a commercial project. They are about 2/3 full. I would like to use them to flood coat a raised panel door - fill in the recessed areas. I understand that it is not a clear finish, & that's not a problem. I will first pour a thin layer to seal everything & to deal with bubbles. After that, can I pour the remaining areas in one coat? Some areas will be 1/2" thick. Or, do I need to pour thin 1/4" thick coats?Answered by the admin
LiquidWood is a consolidant for rotted wood. It's designed to soak into the rotted wood and make it hard again. We do not recommend it be used as a protective coating or sealant type product.
Q is liquid wood strong enough to 'glue' a broken axe or maul handle back together after breaking off at the head from dry rot?Answered by the admin
We have not tested it in this manor. It's primarily a consolidant for rotted wood. We have other adhesives. Please call our technical department at 800-445-1754 for assistance.
Q Is Liquid Wood compatible with West System epoxy, which I own along with low density filler?Answered by the admin We do not test our products with competitor products.