Kromakote 8601-1™

Ceramic-like Epoxy Enamel. 

Outstanding for wear resistance, hardness, gloss, color retention, adhesion, permanence, and durability. Protects against exposure to water, salt, weather, fuels, oils, alkalis, detergents, solvents, and diluted acids. Use on bath tubs, tiles, sinks, tanks, masonry, and more. Stands up to harsh environments and atmospheric conditions. Resists salt spray in marine applications. Apply with brush or spray gun.

Three coats are recommended for porcelain refinishing. Standard base for subsequent clear coats. Requires no primer.

 

 

DescriptionUnitQtyPrice
1 Quart
$44.20
5 Quart
$120.25
5 Gallon
$419.10
10 Gallon
$716.75

TYPICAL TEST RESULTS

Application Brush or Spraygun
Color White (Custom Colors Available)
Coverage Per Gal 200 sq. ft. x 4 mil
Lbs./Gallon 9.7
Pencil Hardness 2H
Solids 50%
Viscosity 300 cps

Customer Questions & Answers

    What is the recommended subsequent clear coat?
  1. Q What is the recommended subsequent clear coat? answer now
    Asked by Noel Weber on August 18, 2021 11:40 am
    A Your application guide suggests using a foam brush, however this paint has enough solvent to make a foam brush deteriorate. any suggestions?
    Answered by the admin

    Kromakote does not require a clear coat finish.

  2. I'm trying to understand whether this would be safe finish/product for young children who use the tub on a daily basis. Are there any tests on its heavy metal or chemical levels, etc. after curing? For example, would this help the problem of an old cast iron tub that's slowly leaching lead into the bathwater or has no one done these basic surface tests?
  3. Q I'm trying to understand whether this would be safe finish/product for young children who use the...... Read more answer now
    Asked by Ann on June 9, 2021 12:20 pm
    Answered by the admin

    Kromakote 8601-1 is a safe product for children using a tub on a daily basis.  Regarding how well it blocks lead from leaching into bathwater there is no available data.

  4. We have a gas stove with porcelain coated burners. The porcelain is chipping in areas and the iron underneath is beginning to rust. Is this product suitable to repair the damage?
  5. Q We have a gas stove with porcelain coated burners. The porcelain is chipping in areas and the iro...... Read more answer now
    Asked by Wesley on March 22, 2021 7:07 pm
    Answered by the admin

    Please call our technical department for further assistance at 800-445-1754.

  6. I have an iron rust stain in toilet bowl that I’ve tried straight muriatic acid on without removal. Could Kromacote be used here? Would it be lumpy or smoothe finish? I thought it might be less expensive than replacing two o/ w good toilets!
  7. Q I have an iron rust stain in toilet bowl that I’ve tried straight muriatic acid on without remova...... Read more answer now
    Asked by Tom Barragry on August 26, 2019 9:08 am
    Answered by the admin

    Call 800-445-1754 to speak with our technical department.

  8. What is the cure time? Kromakote? Is it self leveling?
  9. Q What is the cure time? Kromakote? Is it self leveling? answer now
    Asked by Jerry on June 10, 2019 11:59 am
    Answered by the admin

    It should be sprayed, brushed or rolled on. Overnight should work well for curing.

Send me a notification for each new answer.

Customer Reviews

There are no reviews yet.

Be the first to review “Kromakote 8601-1™”

Your email address will not be published. Required fields are marked *