FerroBond P™

Steel-Filled Epoxy Structural Adhesive Putty. 

Repair or fill metal components, castings, tanks, and magnetic fixtures. Preferred to Metalfix-P where heavier weight, magnetism, or highest heat transfer are the main criteria. Lb/gal: 20.5; Kg/L: 2.5.  Pot Life 1 hour.  Color: Dark Gray

Uses: Applications are nearly limitless. Permanently repair any decorative or structural metal components. Also use these products on ceramic, glass, fiberglass, and most rigid surfaces. They offer the perfect solution to restore and rebuild metal window frames, sinks, pipes, gates, fences, stair rails, tanks, pipelines, off-shore rigs, vehicles, engines, tools, molds, frames, ship decks, bulkheads, hulls, stacks, masts, and more.

Features & Benefits: This compound offers versatility and resistance to wear and tear, even in high impact environments. It is shrink-free, dimensionally stable, and unaffected by atmospheric conditions, water, salt, alkalis, diluted acids, most solvents, oil, and grease. Resists temperatures up to 212°F (100ºC). Apply in any thickness. The cured product is easy to machine with standard tools and can be painted.

UPC:  1-Pound Kit – 051191710018

DescriptionUnitQtyPrice
1 Pound
$31.25
4 Pound
$45.30
25 Pound
$200.85

TYPICAL TEST RESULTS

Kg/cm2 Psi Mpa
Adhesive Shear Strength 175-211 2,200 17,24-20,69
Compressive Strength 611 8,700 59
Tensile Strength 239 3,400 23
Flexural Strength 449 6,400 44
Hardness Shore D  80

Customer Questions & Answers

    I have a two inch wide hole in a steel pipe that I want to 'patch'. Will the FerroBond P work for this void?
  1. Q I have a two inch wide hole in a steel pipe that I want to 'patch'. Will the FerroBond P work for...... Read more
    Asked by Martha Lane on December 12, 2023 9:30 am
    There are no answers for this question yet. Answer now
  2. I have cast iron window grates that have more than half of the casting joints between panels structurally filled. The joints that remain will be difficult to paint and may need to be filled after sandblasting grate. Is FerroBond P the right putty to use?
  3. Q I have cast iron window grates that have more than half of the casting joints between panels stru...... Read more answer now
    Asked by Donald McMican on March 19, 2023 9:52 am
    Answered by the admin

    Yes, you can use the FerroBond P for your application.

  4. I am looking for a product similar to Belzona 111 or Resimac 101. Do you have a similar product?
  5. Q I am looking for a product similar to Belzona 111 or Resimac 101. Do you have a similar product? answer now
    Asked by Gerardo Landa on December 16, 2022 1:52 pm
    Answered by the admin

    The FerroBond P would be the product similar to the 2 you mention.

  6. I need to repair a metal panel that is on the face of a building down low next to the sidewalk. The area is subject to salting. is Steel-Filled Epoxy Structural Adhesive Putty the right product to use?
  7. Q I need to repair a metal panel that is on the face of a building down low next to the sidewalk. T...... Read more answer now
    Asked by jackie on December 12, 2022 11:05 am
    Answered by the admin

    Yes, It would work fine for your repair.

  8. What are the tests used to establish strength values?
  9. Q What are the tests used to establish strength values? answer now
    Asked by Walter Broner on March 2, 2022 2:31 pm
    Answered by the admin

    Ferrobond P is tested with the ASTM Standard for tensil, compression and flex strength. 

Send me a notification for each new answer.

Customer Reviews

There are no reviews yet.

Be the first to review “FerroBond P™”

Your email address will not be published. Required fields are marked *