Aboweld 55-1™
Sag-Resistant Epoxy Paste for Concrete Repair. Use on Vertical, Overhead, and Horizontal Surfaces Without Forms.
Uses: Fill cracks, replace missing concrete, and permanently bond concrete and most rigid materials. This concrete repair epoxy paste excels at both industrial and home repairs. Restore columns, walls, ceilings, foundations, pools, rails, stair risers and treads, sculptures, and more. It is also great for installing machinery, posts, precasts, and other structural components.
Features and Benefits: Aboweld 55-1 has tenacious adhesion and structural strength that make it suitable for even the most punishing environments. It is slump resistant up to 3/8” thick on vertical surfaces and can be applied overhead. Aboweld 55-1 is shrink-free and chemical resistant. It even hardens under water.
Technical Characteristics: Mixing ratio: 1:1. 100% solids. Pot life: approximately 20-30 minutes. Hardens in 1-6 hours depending on temperature. Color: light gray.
Meets ASTM C881/C882 Type III, Grade 3, Class B, C.
See product test data below.
This product is GreenGuard® Certified, meaning that it has been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
Contact customer service for information on cold-weather hardeners.
UPC: 12oz. Kit – 051191771002 | 2-Quart Kit – 051191771019 | 2-Gallon Kit – 051191771026
Customer Questions & Answers
- can aboweld be painted?
- Answered by the admin
Yes, be sure to scuff the surface so the paint adheres well to it.
Can sand be mixed with or sprinkled on Aboweld to match a concrete texture? - Q Can sand be mixed with or sprinkled on Aboweld to match a concrete texture? answer nowAsked by September 23, 2023 2:57 pmonAnswered by the admin
Sand or aggregate can broadcasted on the surface, but you cannot mix any into the Aboweld.
can this be used in a walk in cooler? what is the lowest temperature this can be used? - Q can this be used in a walk in cooler? what is the lowest temperature this can be used? answer nowAsked by August 2, 2023 8:00 amonAnswered by the admin
The temps or air and concrete must be at least 50 degress 2 hours prior to and after application.
Answered by the adminThe temps or air and concrete must be at least 50 degress 2 hours prior to and after application.
Can AboWeld 55-1 be used for chimney crown repair? - Answered by the admin
Yes
what is the coverage rate for a one gallon? how much of the freeze additive is recommended per gallon. I live in a cold winter climate and I am repairing a concrete pond. - Q what is the coverage rate for a one gallon? how much of the freeze additive is recommended per ga...... Read more answer nowAsked by June 8, 2023 9:24 amonAnswered by the admin
One gallon of mixed product will cover approximately 115 cubic inches. We have discontinued the cold weather curing agent. If the temperatures reach at least 50 degrees F (air & concrete temps) for at least 2 hours prior to and 2 hours after application, you should be ok to use the product as is. Applying direct heat after application will accelerate the curing process.
Thomas Wein II –
Great product and company. I ordered 8 of the 10 gallon kits and received them within a week.
Michelle Beiner –
This is now the third time I’m ordering Aboweld 55-1. 1928 Spanish house, 4 original concrete ponds that continue to develop different cracks. I fixed one of them 8 years ago with this product and when I the pond this time, those repairs were as good as new and PERFECT! This stuff is AMAZING!