Aboweld 55-1™

Sag-Resistant Epoxy Paste for Concrete Repair.  Use on Vertical, Overhead, and Horizontal Surfaces Without Forms.

Uses: Fill cracks, replace missing concrete, and permanently bond concrete and
most rigid materials. Aboweld 55-1 excels at both industrial and home repairs. Restore columns, walls, ceilings, foundations, pools, rails, stair risers and treads, sculptures, and more.  It is also great for installing machinery, posts, precasts, and
other structural components.

Features and Benefits: Aboweld 55-1 has tenacious adhesion and structural strength that make it suitable for even the most punishing environments. It is slump resistant up to 3/8” thick on vertical surfaces and can be applied overhead.  Aboweld 55-1 is
shrink-free and chemical resistant.  It even hardens under water.

Technical Characteristics:  Mixing ratio: 1:1. 100% solids.  Pot life: approximately
20-30 minutes.  Hardens in 1-6 hours depending on temperature.  Color: light gray.

Meets ASTM C881/C882 Type III, Grade 3, Class B, C.

See product test data below.

This product is GreenGuard® Certified, meaning that it has been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).


Contact customer service for information on cold-weather hardeners.

DescriptionUnitQtyPrice
12 Ounce
$22.25
2 Quart
$66.90
2 Gallon
$183.75
10 Gallon
$789.25

Customer Questions & Answers

    I need to level out the surface of a retaining wall to make it smooth and don't trust portland cement or concrete patch to hold up to the elements long term. Can aboweld be used in conjunction with backer rod to fill gaps and smooth out the surface? It will be covered by a mural once completed.
  1. Q I need to level out the surface of a retaining wall to make it smooth and don't trust portland ce...... Read more answer now
    Asked by Paul on September 17, 2021 11:14 am
    Answered by the admin

    Yes, you can use it in the manner you describe.

  2. What is the recommended thickness of ABOWELD 55-1 for bonding concrete and a 32" x 32" steel plate?
  3. Q What is the recommended thickness of ABOWELD 55-1 for bonding concrete and a 32" x 32" steel plate? answer now
    Asked by Aidan Boyd on September 15, 2021 8:43 am
    Answered by the admin

    Please call our technical department at 800-445-1754 for further assistance.

  4. Can I cover Aboweld 55-1 with my mortar or how do I match the current mortar color to the Aboweld 55-1?
  5. Q Can I cover Aboweld 55-1 with my mortar or how do I match the current mortar color to the Aboweld...... Read more answer now
    Asked by Craig on August 21, 2021 9:28 am
    Answered by the admin

    You should only replace mortar with mortar.

  6. Our outside neighborhood island has a 10" wide x 8 high inch piece of concrete knocked out of our oval concrete curb by a snow plow. Can your product be used to replace this section and adhere to the existing concrete sides? Is the color concrete light gray?
  7. Q Our outside neighborhood island has a 10" wide x 8 high inch piece of concrete knocked out of our...... Read more answer now
    Asked by Paul Ochs on July 22, 2021 2:09 pm
    Answered by the admin Yes, You can use it for that application. It is gray in color.
  8. Could this product called Abatron 55-1 be used to replace the hands broken off a 5 to 6 foot statue?
  9. Q Could this product called Abatron 55-1 be used to replace the hands broken off a 5 to 6 foot sta...... Read more answer now
    Asked by marty on June 22, 2021 7:39 pm
    Answered by the admin

    You could use it to secure the broken pieces back into place.

Send me a notification for each new answer.

Customer Reviews

There are no reviews yet.

Be the first to review “Aboweld 55-1™”

Your email address will not be published. Required fields are marked *