Sag-Resistant Epoxy Paste for Concrete Repair. Use on Vertical, Overhead, and Horizontal Surfaces Without Forms.
Uses: Fill cracks, replace missing concrete, and permanently bond concrete and most rigid materials. Aboweld 55-1 excels at both industrial and home repairs. Restore columns, walls, ceilings, foundations, pools, rails, stair risers and treads, sculptures, and more. It is also great for installing machinery, posts, precasts, and other structural components.
Features and Benefits: Aboweld 55-1 has tenacious adhesion and structural strength that make it suitable for even the most punishing environments. It is slump resistant up to 3/8” thick on vertical surfaces and can be applied overhead. Aboweld 55-1 is shrink-free and chemical resistant. It even hardens under water.
Technical Characteristics: Mixing ratio: 1:1. 100% solids. Pot life: approximately 20-30 minutes. Hardens in 1-6 hours depending on temperature. Color: light gray.
Meets ASTM C881/C882 Type III, Grade 3, Class B, C.
See product test data below.
This product is GreenGuard® Certified, meaning that it has been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
Contact customer service for information on cold-weather hardeners.
Customer Questions & Answers
I need to level out the surface of a retaining wall to make it smooth and don't trust portland cement or concrete patch to hold up to the elements long term. Can aboweld be used in conjunction with backer rod to fill gaps and smooth out the surface? It will be covered by a mural once completed.
- What is the recommended thickness of ABOWELD 55-1 for bonding concrete and a 32" x 32" steel plate?
Q What is the recommended thickness of ABOWELD 55-1 for bonding concrete and a 32" x 32" steel plate? answer nowAsked by September 15, 2021 8:43 amonAnswered by the admin
Please call our technical department at 800-445-1754 for further assistance.
Can I cover Aboweld 55-1 with my mortar or how do I match the current mortar color to the Aboweld 55-1?
- Our outside neighborhood island has a 10" wide x 8 high inch piece of concrete knocked out of our oval concrete curb by a snow plow. Can your product be used to replace this section and adhere to the existing concrete sides? Is the color concrete light gray?
- Could this product called Abatron 55-1 be used to replace the hands broken off a 5 to 6 foot statue?