Abojet®

Structural Crack Injection Epoxy.

Uses: Restore monolithic integrity to cracked structural elements by injecting Abojet into the crack to fill and “weld” it back together.  Seals foundations and below-grade walls against water seepage. The Abojet series of resins is most commonly used in the restoration of load-bearing walls such as foundations, retaining walls, abutments, swimming pools, dams, decks, silos, bridge piers, columns, domes, concrete pipes, and tanks.

Features and Benefits: As Abojet bonds permanently to most substrates and is stronger than concrete, the “welded” repair is often stronger than the original material.  It prevents the need for demolition where structural elements cannot be compromised.  Abojet is dependable and cost-effective.  It is available in prepackaged, 2-component cartridges or in bulk packaging for large projects.  Available in three formulations for a variety of crack sizes.

The Abojet Crack Injection Process: The Abojet system consists of a resin and hardener packaged in a single cartridge. When the barrier separating them is plunged, the mixture begins to harden. Injected into a crack or cavity, it hardens quickly, filling the cavity and joining the two sides back together. The hardened system is dimensionally stable and virtually shrink-free.

Abojet is often sold in conjunction with Aboweld 55-1, which is used to dam the exterior of the crack and set injection ports.  Injection ports are also sold separately.

Technical Characteristics:  Each 10 fluid ounce cartridge fills 18 cubic inches.  Cartridges include plunger and nozzle.  Empty caulking tubes are sold separately for quart and gallon volume packaging. Color: gray.

Abojet 8610-1 is recommended for very thin cracks.  Abojet 8610-1 meets ASTM C881 Type III, Grade 1, Class B, C.

Abojet 8610-3 is recommended for cracks < 0.5 in (1 cm).  Abojet 8610-3 meets ASTM C881 Types I and II, Grade 1, Class B, C.

Abojet 8702-3 is recommended for cracks > 0.5 in (1 cm).  Abojet 8702-3 meets ASTM C881 Type II, Grade 2, Class B, C.

DescriptionUnitQtyPrice
Each
$30.95
Each
$30.95
Each
$30.95
6 Quart
$140.50
6 Quart
$140.50
6 Quart
$140.50
6 Gallon
$506.40
6 Gallon
$506.40
6 Gallon
$506.40

Customer Questions & Answers

    Is the Abojet 8610-1 effective in filling hairline cracks in a flat concrete porch? The crack in the concrete porch leaks rainwater into my garage underneath. The nozzle for 8610-1 does not look very needle-like to direct the material into the hairline crack.
  1. Q Is the Abojet 8610-1 effective in filling hairline cracks in a flat concrete porch? The crack in ...... Read more answer now
    Asked by Steve Lussier on October 23, 2017 12:40 pm
    Answered by the admin

    It can be used to fill narrow cracks. However, the hairline cracks are hard to fill, so you will probably have to widen them slightly with a grinder to get much material into them. 

  2. What is the Abojet color when dried? Must cartridge be finished in one application?
  3. Q What is the Abojet color when dried? Must cartridge be finished in one application? answer now
    Asked by Les Paul on October 23, 2017 10:21 am
    Answered by the admin

    Abojet® is clear and slightly amber in color when hardened. Yes, Cartridges must be used in a single application. 

Send me a notification for each new answer.

Customer Reviews

There are no reviews yet.

Be the first to review “Abojet®

Your email address will not be published. Required fields are marked *