Additional Information

Color

Light Gray, Dark Gray, Beige, Brick Red, Clear Amber

Abocrete™ Kit

Liquid Epoxy Compound for Patching, Resurfacing, and Rebuilding Concrete. 

Uses: Repairs industrial floors, loading docks, sidewalks, driveways, stairs, parking decks, and ship docks permanently and cost-effectively. Perfect for fixing pitted, spalled, worn or cracked concrete. Abocrete bonds, levels, rebuilds, and resurfaces concrete and most rigid surfaces. Holds up well to heavy forklift and truck traffic. Eliminates tripping hazards both at home and in the workplace. Also great for anchoring posts and railings and installing machinery, precasts, columns, and more. Use with forms to rebuild steps and vertical columns.

Features and Benefits: Easy to mix and apply. Blend in sand to create a cement-like epoxy compound that self-levels and is shrink-free. Apply in any thickness for a finish that is stronger than concrete! Change the viscosity by adding sand or aggregate. It makes a great floor and deck coating that can be made slip resistant by broadcasting sand or ColorGrit™ over the wet Abocrete. It is unaffected by salt water, oils, and chemicals that erode concrete.

Click Here For an Abocrete Color Chart

Technical Characteristics: 
Apply with simple hand tools or by brush, paint roller or squeegee. One gallon of Abocrete, without sand or aggregate, covers 80 sq. ft., 20 mils thick. One Abocrete kit with sand covers approximately 28 sq. ft., 1/8 in. thick.  Hardens in 1-5 hours. 100 % epoxy solids. Contains no water or solvents. GREENGUARD® Certified.  Meets ASTM C881/C881M:

For Cold/Sub-Freezing Weather or Wet Surfaces: Abocrete (A) can be blended with Abocure 7912-1 in a ratio of 2 parts by volume Abocrete (A) with 1 part by volume Abocure 7912-1 for patching and resurfacing.

This product is GREENGUARD® Certified, meaning that is has been found to contain virtually no VOC’s (volatile organic compounds).
PACKAGING: 

Abocrete Kit:  1 gallon liquid epoxy resin (Abocrete A), 1 quart liquid hardener (Abocrete B) and enough sand to make about 4 gallons of Abocrete compound, all packaged separately in the same 5 gallon pail. Also includes: paint mixing stick, 8 fluid ounce plastic bottle with spout, disposable gloves, and plastic putty knife.

Abocrete Kit no sand: 1 gallon liquid epoxy resin (Abocrete A), 1 quart liquid hardener (Abocrete B).

Mini Abocrete Kit: 1 quart liquid epoxy resin (Abocrete A), 1/2 pint liquid hardener (Abocrete B) and enough sand to blend about 1 gallon of Abocrete compound, all packaged separately in the same 2 gallon pail. Also includes: paint mixing stick, 8 fluid ounce plastic bottle with spout, disposable gloves, and plastic putty knife.

Abocrete 6.25 Gallon Kit: 5 gallons liquid epoxy resin (Abocrete A), 1 gallon liquid hardener (Abocrete B), 1 quart liquid hardener (Abocrete B).

Click Here For an Abocrete Color Chart

 

(2 customer reviews)
DescriptionUnitQtyPrice
1 Kit
$49.50
1 Kit
$149.95
1 Kit
$139.95
1 Kit
$527.90

Garage Floor Coatings

LOCATE OUR DEALERS Click Here
Or

Customer Questions & Answers

    Can it be used as epoxy to stick pre-cast concrete blocks to any concrete ground?
  1. Q Can it be used as epoxy to stick pre-cast concrete blocks to any concrete ground? answer now
    Asked by hafiz on May 4, 2021 10:03 pm
    Answered by the admin It's a self-leveling product. A better option for your application is the Aboweld 55-1.
  2. Can a o fete be applied over old vinyl floor glue?
  3. Q Can a o fete be applied over old vinyl floor glue? answer now
    Asked by Nicholas Guenther on April 25, 2021 11:22 pm
    Answered by the admin No. You should be sure to clean it thoroughly so that the Abocrete adheres and bonds well.
  4. A corner of our concrete porch is broken off. It's approximately 5 " X 5" on each side. Can it be patched with any of your products?
  5. Q A corner of our concrete porch is broken off. It's approximately 5 " X 5" on each side. Can it be...... Read more answer now
    Asked by Thomas Propst on April 17, 2021 11:57 am
    Answered by the admin

    You can use Aboweld 55-1 for your repair.

  6. When finishing the garage floor with epoxy should the Abrocrete be used before or after etching the surface?
  7. Q When finishing the garage floor with epoxy should the Abrocrete be used before or after etching t...... Read more answer now
    Asked by James on April 7, 2021 8:12 am
    Answered by the admin

    After

  8. What type or grade of sand should be used both in the Abocrete mix and for broadcasting on top?
  9. Q What type or grade of sand should be used both in the Abocrete mix and for broadcasting on top? answer now
    Asked by Dan on May 20, 2020 9:14 am
    Answered by the admin A fine, grit silica sand is what we ship with Abocrete. You can use any good, clean sand or aggregate. Do not use playbox sand.

Send me a notification for each new answer.

Customer Reviews

  1. Charlie Sand

    Great stuff!

  2. Dan

    Use it years ago made every doubting Thomas eat there words

Add a review

Your email address will not be published. Required fields are marked *