Liquid Epoxy Compound for Patching, Resurfacing, and Rebuilding Concrete.
Uses: Repairs industrial floors, loading docks, sidewalks, driveways, stairs, parking decks, and ship docks permanently and cost-effectively. Perfect for fixing pitted, spalled, worn or cracked concrete. Abocrete bonds, levels, rebuilds, and resurfaces concrete and most rigid surfaces. Holds up well to heavy forklift and truck traffic. Eliminates tripping hazards both at home and in the workplace. Also great for anchoring posts and railings and installing machinery, precasts, columns, and more. Use with forms to rebuild steps and vertical columns.
Features and Benefits: Easy to mix and apply. Blend in sand to create a cement-like epoxy compound that self-levels and is shrink-free. Apply in any thickness for a finish that is stronger than concrete! Change the viscosity by adding sand or aggregate. It makes a great floor and deck coating that can be made slip resistant by broadcasting sand or ColorGrit™ over the wet Abocrete. It is unaffected by salt water, oils, and other chemicals that erode concrete.
Apply with simple hand tools or by brush, paint roller or squeegee. One gallon of Abocrete, without sand or aggregate, covers 80 sq. ft., 20 mils thick. One Abocrete kit with sand covers approximately 28 sq. ft., 1/8 in. thick. Hardens in 1-5 hours. 100 % epoxy solids. Contains no water or solvents. GREENGuard Certified®. ACI 503.1 ASTM C881, Tp I, III, 3:3.
For Cold/Sub-Freezing Weather or Wet Surfaces: Abocrete (A) can be blended with Abocure 7912-1 in a ratio of 2 parts by volume Abocrete (A) with 1 part by volume Abocure 7912-1 for patching and resurfacing.
This product is GreenGuard® Certified, meaning that it contains virtually no VOC’s (volatile organic compounds).
Abocrete Kit: 1 gallon liquid epoxy resin (Abocrete A), 1 quart liquid hardener (Abocrete B) and enough sand to make about 4 gallons of Abocrete compound, all packaged separately in the same 5 gallon pail. Also includes: paint mixing stick, 8 fluid ounce plastic bottle with spout, disposable gloves, and plastic putty knife.
Abocrete Kit no sand: 1 gallon liquid epoxy resin (Abocrete A), 1 quart liquid hardener (Abocrete B).
Mini Abocrete Kit: 1 quart liquid epoxy resin (Abocrete A), 1/2 pint liquid hardener (Abocrete B) and enough sand to blend about 1 gallon of Abocrete compound, all packaged separately in the same 2 gallon pail. Also includes: paint mixing stick, 8 fluid ounce plastic bottle with spout, disposable gloves, and plastic putty knife.
The ABOCRETE will bond to the fiberglass. However, depending on the thickness to which it is applied, there is no guarantee that it will not crack.
Yes, Abocrete will bond to itself. If it has been a while since you first applied it, use a primer such as Primekote 8006-1 OR sand to improve adhesion.