High-Strength Epoxy Adhesive that Bonds Newly Poured Concrete to Old Concrete.
Uses: Abocast 8005-6 creates a stronger-than-concrete bond between old concrete and newly poured concrete. Use this epoxy bonding agent to repair bridges, runways, ramps, decks, driveways, and patios. It can also be used to resurface concrete and terrazzo floors with thin, lightweight layers of concrete. Abocast 8005-6 promotes adhesion where thin layers of concrete otherwise would not be possible.
Features and Benefits: Abocast 8005-6 is easy to apply with a brush or roller. This highly adhesive epoxy bonds to most rigid surfaces. It is also outstanding for resurfacing floors and can be extended with fillers like sand, gravel, or chips. It is excellent for functional and decorative non-skid floors. Abocast 8005-6 is resistant to chemicals, fuels, alkalis, and water. It hardens on wet surfaces and underwater.
Technical Characteristics: Mixing ratio: 7/3 by volume. Pot life: 30-40 minutes. Hardens in 2-5 hours depending on temperature and thickness. 100% solids. Color: tan. Coverage: Approximately 80 sq. ft. per gallon.
Customer Questions & Answers
- I have roughly 35 Sq ft of reinforced concrete that is the top of water storage tank, located in Pennsylvania (subject to numerous freeze/thaw cycles) I repaired a large crack about 8 yrs ago with skim coat of concrete which I neglected to reseal that last few years and as I removed what was left of the skim coat I discovered voids about 1" deep. Please advise.
- I am repairing a corner of my foundation that is deteriorated. I was going to wet pour concrete. Would Abocast be the right product to use as a bonding agent?
- We are doing a major stair repair and have used a combination of products. I need to finish the stairs is this the right product?
- Q We are doing a major stair repair and have used a combination of products. I need to finish the s...... Read more answer nowAsked by July 14, 2019 9:48 pmonAnswered by the admin
Please call our technical department at 800-445-1754 to explain your project further for the best product suggestion.