Ceramic-like epoxy enamel recommended for tanks, sinks, and tubs.

Uses: Protection for most rigid surfaces exposed to hot and cold water, salt, weathering, fuels, oils, alkalis, detergents, common solvents, and diluted acids. Specific uses include: bathtubs, ceramic and other tiles, bricks, and stone surfaces. For industrial, construction, marine, and general environment use.

Features and Benefits: Outstanding for wear resistance, hardness, gloss, color retention, adhesion, and permanence. Can be used on rusty surfaces. Superior salt-spray resistance in marine applications. Unsurpassed exterior and interior durability. Effective on moist or wet surfaces. Unaffected by atmospheric conditions. Thin with Abosolv 8006-3. High temperature bake is optional. 3 coats are recommended for porcelain refinishing. Standard base for subsequent clear coats. Requires no primer.

Typical Test Results
Application	Brush or Spraygun
Color	White (Custom Colors Available)
Coverage Per Gal	200 sq. ft. x 4 mil
Lbs./Gallon	9.7
Pencil Hardness	2H
Pot Life	8-12 hours
Ratio Resin (A) to Hardener (B)	4/1 by volume
Solids	50%
Viscosity	300 cps

 Download Spec Sheet (1.02 MB)